Believer Drone Ready To Fly v2.2
- Built, Tested, and Configured Believer Long-Range Surveillance Drone
- Carry Specialized Payloads, Longer and Farther
- Carry up to 1.5 lb (700g) Payload
- Wingspan 1960 mm
- Up to 12 mi (20 km) Range & 2 hours (120 minutes) Flight Time
- Powered By Open-Source Pixhawk & Ardupilot (default) / PX4
- Can Be Customized Depending On Customer Requirements – Ask Us!
- Global International Shipping!
- Read a Detailed Product Description Below
Looking for a larger or smaller fixed-wing drone option for your project? Check out the Skywalker Ready to Fly Drone or Talon GT Ready to Fly Drone.
The Believer Ready to Fly drone is one of the best fixed-wing drones in the market, with its ease of use accompanied by offering a great flight time.
The sophisticated design is durable, efficient, and easy to repair in the event of damage. Due to its detachable parts throughout its build, the drone is quick and easy to disassemble for transport and for maintenance purposes.
Read all standard features and upgradable customizations of the Believer Ready to Fly Drone v2.2 on this page.
- Payloads up to 700g (1.5 lb)
- Flight Range 20 km (12 mi)
- Flight Time 120 minutes
- 1960 mm wingspan
- Pixhawk ArduPilot or PX4 (optional)
-
US-Made
ComponentsUAV Systems International supports domestic supply chains in our products.
The Believer Ready To Fly Drone features extensive use of U.S manufactured components throughout the drone.
Our flight controllers and onboard electronics are all manufactured in California, giving you the performance, reliability you are looking for in your drone.
The Believer Ready To Fly drone is both NDAA 848 and TAA compliant.
-
- 1x Believer Ready to Fly drone with All Electronics Setup & Configured
- 1x FrSky Taranis QX7 Transmitter
- 1x LiPo Balance Charger
- 2x 14,000 mAh 6S LiPo Battery
- 2x LiPo Battery Safety Bags
- 2x UAV Stickers
- 1x Getting Started Guide & Instructions
Flight Controller
The Cube Orange is the standard flight controller option included with your drone. As one of the most popular flight controllers on the market, it offers proven performance and reliability.
In addition, the carrier board also features a 1090 ADS-B uAvionix module with 12 miles (20km) range allowing you to see aircraft operating in your vicinity.
GPS & Sonar
The Believer Ready to Fly drone v2.2 uses a high-quality US/Swiss-made Ublox NEO-M8N. It is equipped with dual compasses, allowing for incredibly accurate positioning.
A highly accurate, USA-made sonar module, gives extra precision and stability when flying under 23 ft. (ca. 7 m.).
If you have any other GPS requirements for your drone then please talk to one of our drone specialists.
RFD900X Telemetry
The Believer Long-Range Drone uses the Australian RFD900X telemetry module, giving you the potential to fly up to 20 km (12 mi).
The RFD900X also features AES-256 encryption, ensuring the link between your ground station and the Skywalker Long Range drone is secure at all times.
Quality ESCs
The ESCs used on the Believer Ready to Fly drone v2.2 are lighter than their predecessors, delivering a much more agile feel, along with a quicker response, and feature a higher power to weight ratio.These ESCs are perfect to get maximum efficiency out of your drone.
Brushless Motors
The Believer Ready to Fly drone v2.2 is powered by 1 powerful brushless motor which is rear-mounted and features a folding propeller. The folding propeller ensures that your hand does not get injured by the propeller when the hand launches the drone into the air.The high-quality powerful brushless motor requires low maintenance compared to other types of motors and offers superior power and efficiency for the size of the motor.
For Long Ranges
The Believer Ready to Fly drone v2.2 uses the L9R Long Range Radio module, giving you the potential to fly up to 3.22 km (2 mi). The range is upgradable by an add-on further down mentioned on this page.
In case you require any other module, please talk to one of our agents.
The newly designed battery packs currently weigh 32% less than the same sized LiPo battery that we used before, giving you the same great power while saving weight which directly translates into additional flight time or payload.Extra battery packs are also one of the most common add-ons that customers buy with us. No one wants to miss out on some extra flight time!
ArduPilot Mission Planner
UAV Systems International is an official ArduPilot partner.
ArduPilot is the most advanced, full-featured, and reliable drone open-source software. The ArduPilot open-source software is constantly evolving and being improved by a diverse team of developers worldwide.
Open-Source Software
The Believer Ready to Fly drone uses the Orange Cube flight controller, which is a fully open-source flight control system running ArduPilot.
The Cube Orange flight controller is supported by developers all over the world and can be modified to take your Believer Ready to Fly drone to the next level.
Specifications
Table header 0 Specs Flight Time 120 Mins Payload Capabiliy (In Addition To UAV + Battery) 700g (1.5 lb) Max Take-Off Weight 5500g (12.12 lb) Recommended Flight Speed 72 km/h
(45Â mph)Voltage 22.2V Frequency 2.4 GHz Battery (each battery) 14,000 mAh Wingspan 1960 mm
Reviews
There are no reviews yet.